Z AXIAL PRESET GAUGE-ZOP-50 TYPE
Z AXIAL PRESET GAUGE-ZOP-50 TYPE
- Height : 50 mm
- Base built-in magnets for easy setup
- The red lamp lights-up when touched
- Height can be micro adjusted and audited by gauge block
- Can be used vertically or horizontally
- Accuracy : within 0.005mm
※ Battery type : LR44/A76/G13*2 pcs
FEATURES
- The bottom of ZOP-50 has adjustable device, using ground parallels while adjust the height
- High precision products, it’s not suitable inspect accuracy with calipers
- Please feed quickly and the light will on, and move slightly back a little more until light off and feed slightly again until light on, to make sure the accuracy
- While testing the side-surface, please touch the top of surface of ZOP-50
| TYPE | HEIGHT |
|---|---|
| Z0P-50 | 50±0.005 |
Recommend
Z AXIAL PRESET GAUGE (INDICATOR)-ZOV TYPE
Z AXIAL PRESET GAUGE (INDICATOR)-ZOV TYPE
- For setting tool length on machining centers/lathe centers.
- Setting height: 50±0.005 mm
- Large measuring surface and easy to operate.
- Low spring force to avoid breakage of small end mill and drill.
- Easy to be calibrated by a ground parallel or gauge block.
- ZIP-50A: Better parallelism, sensitivity, and precision for use.
Z AXIAL PRESET GAUGE (INDICATOR)-ZIP TYPE
Z AXIAL PRESET GAUGE (INDICATOR)-ZIP TYPE
- For setting tool length on machining centers/lathe centers.
- Setting height : 50±0.005mm
- Large measuring surface and easy to operate.
- Low spring force to avoid breakage of small end mill and drill.
- Easy to be calibrated by a ground parallel or gauge block.
- ZIP-50A : Better parallelism, sensitivity, and precision for use.