OPTICAL EDGE FINDER-SOE TYPE
OPTICAL EDGE FINDER-SOE TYPE
- Not necessary to rotate while measuring
- Quickly locate work edges
- Save time to find position, for milling machine, jig borers, and other machine tools
- Accuracy : 0.005mm (Is a High Sensible Position Measuring)
- Battery type : UM5#，12V*1 pcs
FEATURES
- Uses dry batteries to light the red lamp.
- The scope of application includes edge surface, inside and outside diameters and high efficiency.
- There is a safety spring puller which puts the ball precisely back to the positing when ball breaks away from ball seat.
An optical edge finder is a precision tool commonly used to locate a workpiece's edges, centerlines, or precise reference points in machining and milling operations. It keeps accurate alignment of the cutting tool relative to the workpiece, which is crucial for achieving precise dimensions and tolerances in manufacturing. The optical edge finder typically consists of a shank and a clear optical lens (often with a crosshair or reticle). It is mounted in the spindle of a milling machine or other similar equipment. The optical lens provides an enlarged view of the workpiece and tool contact point. The optical edge finder is ideal for precision machining where exact positioning is critical. It provides highly accurate edge detection.
Li-Hsun's optical edge finders can quickly locate the edges of a workpiece, saving time during the machining process. They are suitable for various materials and applications, including milling machines, jig borers, and other machine tools. Please feel free to contact us for further information.
Unit:mm
| TYPE | D | L | d |
|---|---|---|---|
| SOE-20S | Φ20 | 120 | Φ10 |
| SOE-20L | Φ20 | 158 | Φ10 |
| SOE-20LB | Φ20 | 158 | Φ10 |
| SOE-32L | Φ32 | 158 | Φ10 |
| SOE-32LB | Φ32 | 158 | Φ10 |
Recommend
CERAMIC EDGE FINDER
CERAMIC EDGE FINDER
- The MEP type is nonmagnetic, and the front tip wholly made of ceramic
- Accuracy : 0.005 mm
MACHANICAL EDGE FINDER-SME/TN TYPE
MACHANICAL EDGE FINDER-SME/TN TYPE
- Φ10mm straight shank can be installed directly on milling chuck or drilling chuck (refer to Fig.1)
- Press slightly on edge of sensor unit with hands to keep eccentricity at 0.5mm (refer to Fig.2)
- Rotate with speed of 400-600 rpm
- Make sensor unit contact to the end face of workpiece shown as Fig.2. Then, contact and move gradually, it is going to turn into Fig.3 and sensor unit keeps still. Furthermore, if fine feed is started, then sensor until will move according to a specific direction. The start point of this movement is the basis position to look for.
- The position of end face of the workpiece is the coordinate position of sensor unit plus radius 5mm
- Accuracy : 0.005mm
CAUTIONS
- Do not use the bend part or to drag or pull with force.
- Never let impurities or foreign things stain on the slide face.
- While using, be sure the speed not over 600rpm.
- Never apply it on machine of horizontal type