LATHE HIGH-SPEED, WATER-PROOF CENTER-NCH (NUT) TYPE
LATHE HIGH-SPEED, WATER-PROOF CENTER-NCH (NUT) TYPE
- Center shaft is made of alloy steel and hardened through vacuum heat treatment to provide higher rigidity HRC60°±1°
- Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
※ Applicable to high speed lathes and CNC lathes with heavy loads.
| TYPE | A | B | C | D | D1 | d | L | d1 | Accuracy | Max R.P.M | θ |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NCH-MT.4AT | 42 | 76 | 108 | 60 | 32 | - | 226 | 12 | 0.003 | 4500 R.P.M | 60° |
| NCH-MT.5AT | 45 | 84 | 136 | 83 | 40 | - | 265 | 18 | 3500 R.P.M | ||
| NCH-MT.6AT | 80 | 130 | 190 | 128 | 70 | - | 400 | - | 0.008 | 1500 R.P.M | |
| NCH-MT.4BT | 52 | 76 | 108 | 60 | 32 | 12 | 256 | 12 | 0.003 | 4500 R.P.M | |
| NCH-MT.5BT | 65 | 82 | 136 | 80 | 40 | 14 | 283 | 18 | 3500 R.P.M |
Recommend
LATHE BULL NOSE CENTER-BC TYPE
LATHE BULL NOSE CENTER-BC TYPE
- The tip of bull nose center uses Cr-Mo steel and hardened to (HRC60°±1°).
- Uses a combination of taper roller bearing and ball bearing.
- Applicable to pipes turning.
- The tailstock pressure of lathe adjusts to six to ten kilograms. (for reference)
LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE
LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE
- The shaft uses alloy steel and hardened through vacuum heat treatment to (HRC60°±1°).
- Uses the combination of taper roller bearing, thrust bearing and needle bearing.
- Applicable to medium and heavy loads, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
- Adjustable to reach original loading capacity after using for a long period of time.
※ NCR-B Type : Long nose live centers are suitable for small workpieces.
※ Waterproof design
LATHE MEDIUM-LOAD CENTER-NC TYPE
LATHE MEDIUM-LOAD CENTER-NC TYPE
- Front end is fitted with angular contact ball bearing, thrust bearing and needle bearing.
- Suitable for CNC lathes at high-speed and medium-load. The waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
※ NC-B Type : Long nose live centers are suitable for small workpieces.