ENDMILL HELIX RE-SHARPENING EH TYPE
ENDMILL HELIX RE-SHARPENING EH TYPE
- The universal tool & cutter grinder Model EH-832 is versatile in operation without requiring special skills. All milling cutters, endmills, shell endmills,staggered tooth cutters, rough endmills, countersinks (2 flutes, 4 flutes) and the angle of endmill helix can sharpen 2, 3, 4, 5, 6 flutes.
- The Model EH-832 is designed to sharpen HSS and carbide toolings in small and medium quantities.
- In one chucking operation, the machine can perform the grinding of the rake angle of the flute, clearance angle on the periphery and the end of the tool.
- A few seconds set up time for helix angle.
- Due to the backlash free operation, spiral toothed, solid carbide or carbide tipped milling cutters can be ground with high accuracy thus far only achieved by CNC grinders.
- The heavy duty compound slides and one piece cast-iron base provide extra rigidity and minimize vibration.
| Standard Accessories |
|---|
| Taper Grinding Device |
| One Indexing Plate 10, 12 Divisions |
| One Set of Operating Tools |
| Grinding (Carbide) : SDC(1.5mm，Φ8-12mm)、SDC(2.0mm，Φ12-32mm) |
| C5 Collet: Φ12、Φ16、Φ20、Φ25、Φ32mm，Diameter Φ50mm |
| Holder / Collet : C20-SSK10-80L*1 PCS (Φ6、Φ8、Φ10mm) |
| Options |
|---|
| Grinding (HSS) : CBN(1.5mm，Φ8-12mm)、CBN(2.0mm，Φ12-32mm) |
| Specifications | |
|---|---|
| Tool Diameter | Φ8-Φ32mm |
| Spiral Length with Workhead Spindle | 160mm |
| Longitudinal Travel of Workhead | 150mm |
| Cross Travel of Workhead | 130mm |
| Vertical Movement of Wheel Head | 50mm |
| Tilting Angle of Wheel Head | ±90 |
| Workhead Spindle | C5 |
| Spiral flute & Axial Relief Grinding Infinitely Variable, Left & Right Hand | |
| Helix Angle | 0°-90° |
| Grinding Wheel Bore | 19.06mm |
| Grinding Wheel Diameter | Max. 90mm |
| Grinding Motor | 0.25KW |
| Grinding Wheel Direction | Clockwise |
| Grinding Spindle Speed | 4800 R.P.M (250w-300w) |
| Net Weight | 57KGS |
| Dimensions | 860*430*500mm |
| Power Supply | AC110/AC220 50/60 HZ |
Safety Instructions
Names of Components
Preparation for Endmill grinding
Grinding Procedures
Grinding Wheel Replacement
Maintenance After Operation
Recommend
3 SLANT DRILL BIT SHARPENER MACHINE -MD TYPE
3 SLANT DRILL BIT SHARPENER MACHINE -MD TYPE
1.Drill tightened design with bearing device.
2.Adjustable trimming angle.
3.Adjustable secondary clearance angle.
Patent number:
ZL 200900174158.5,
M369817
DRILL BIT SHARPENER MACHINE -DM TYPE
DRILL BIT SHARPENER MACHINE -DM TYPE
- Loosen the side knob (B1) and open the side cover (B2).
- Use a 4mm hexagon wrench to loosen the screw (B3), unscrew it counter clockwise.
- Replace with a new diamond grinding wheel and tighten the screw after the wheel is installed.
- Be sure to close the side cover (B2) properly and to fasten the side knob (B1).
Please DO NOT switch on the machine BEFORE
- The diamond wheel screw (B3) is tightly screwed.
- The side cover (B2) is properly closed.
- The right knob (B1) is fully fastened.
※ In case of any hazard occurring, please make sure that the above measures are followed strictly.
※ The machine has an automatic Power-off device to ensure operator’s safety. Power supply will be cut-off immediately when the cover is opened.