LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE
LATHE ADJUSTMENT WATER-PROOF CENTER-NCR TYPE
- The shaft uses alloy steel and hardened through vacuum heat treatment to (HRC60°±1°).
- Uses the combination of taper roller bearing, thrust bearing and needle bearing.
- Applicable to medium and heavy loads, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
- Adjustable to reach original loading capacity after using for a long period of time.
※ NCR-B Type : Long nose live centers are suitable for small workpieces.
※ Waterproof design
| TYPE | A | B | C | D | D1 | d | L | Accuracy | Max R.P.M | θ |
|---|---|---|---|---|---|---|---|---|---|---|
| NCR-MT.3A | 37 | 47 | 86 | 50 | 25 | - | 170 | 0.003 | 5000 R.P.M | 60° |
| NCR-MT.4A | 45 | 59 | 108 | 65 | 32 | - | 212 | 4500 R.P.M | ||
| NCR-MT.5A | 50 | 62 | 136 | 80 | 40 | - | 248 | 3500 R.P.M | ||
| NCR-MT.6A | 78 | 85 | 189 | 128 | 60 | - | 352 | 0.008 | 1500 R.P.M | |
| NCR-MT.3B | 47 | 47 | 86 | 50 | 25 | 10 | 180 | 0.003 | 5000 R.P.M | |
| NCR-MT.4B | 60 | 59 | 108 | 65 | 32 | 12 | 227 | 4500 R.P.M | ||
| NCR-MT.5B | 70 | 62 | 136 | 80 | 40 | 14 | 268 | 3500 R.P.M |
Recommend
LATHE BULL NOSE CENTER-BC TYPE
LATHE BULL NOSE CENTER-BC TYPE
- The tip of bull nose center uses Cr-Mo steel and hardened to (HRC60°±1°).
- Uses a combination of taper roller bearing and ball bearing.
- Applicable to pipes turning.
- The tailstock pressure of lathe adjusts to six to ten kilograms. (for reference)
LATHE SUPER-LOAD CENTER-SW TYPE
LATHE SUPER-LOAD CENTER-SW TYPE
- Shaft uses alloy steel and hardened through vacuum heat treatment to( HRC60°～62°).
- Applicable to heavy duty loads.
- The tailstock pressure of lathe adjusts to five to twelve kilograms. (for reference)
※ Waterproof design
LATHE CENTER HIGH-PERFORMANCE-NCK TYPE
LATHE CENTER HIGH-PERFORMANCE-NCK TYPE
- The shaft is made of alloy steel and through vacuum heat treatment HRC60°±1°. It processes great rigidity and high durability.
- The center uses the combination of roller bearings, thrust ball bearing, the tailstock pressure of lathe adjusts to five to eight kilograms (for reference).
※ NCK-B type: Long nose live centers are suitable for small workpieces.