Z AXIAL PRESET GAUGE (INDICATOR)-ZIP TYPE

Z AXIAL PRESET GAUGE (INDICATOR)-ZOV TYPE

1. For setting tool length on machining centers/lathe centers.
2. Setting height: 50±0.005 mm
3. Large measuring surface and easy to operate.
4. Low spring force to avoid breakage of small end mill and drill.
5. Easy to be calibrated by a ground parallel or gauge block.
6. ZIP-50A: Better parallelism, sensitivity, and precision for use.

Z AXIAL PRESET GAUGE-ZOP-50 TYPE

1. Height : 50 mm
2. Base built-in magnets for easy setup
3. The red lamp lights-up when touched
4. Height can be micro adjusted and audited by gauge block
5. Can be used vertically or horizontally
6. Accuracy : within 0.005mm

※ Battery type : LR44/A76/G13*2 pcs

FEATURES

1. The bottom of ZOP-50 has adjustable device, using ground parallels while adjust the height
2. High precision products, it’s not suitable inspect accuracy with calipers
3. Please feed quickly and the light will on, and move slightly back a little more until light off and feed slightly again until light on, to make sure the accuracy
4. While testing the side-surface, please touch the top of surface of ZOP-50