LATHE HEAVY-LOAD CENTER-NCF TYPE
LATHE HEAVY-LOAD CENTER-NCF TYPE
- The shaft is made of alloy steel and through vacuum heat treatment (HRC60°±1°). It possesses great rigidity and high durability.
- Front end is fitted with angular contact ball bearing & thrust bearing. Middle & Rear needle bearing and the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
※ NCF-B Type : Long nose live centers are suitable for small workpieces.
| TYPE | A | B | C | D | D1 | d | L | d1 | Accuracy | Max R.P.M | θ |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NCF-MT.3A | 38 | 50 | 86 | 53 | 30 | - | 174 | 12 | 0.003 | 6000 R.P.M | 60° |
| NCF-MT.4A | 45 | 60 | 108 | 68 | 32 | - | 213 | 12 | 5500 R.P.M | ||
| NCF-MT.5A | 52 | 70 | 136 | 87 | 40 | - | 258 | 18 | 4000 R.P.M | ||
| NCF-MT.3B | 52 | 50 | 86 | 53 | 30 | 10 | 188 | 12 | 6000 R.P.M | ||
| NCF-MT.4B | 55 | 60 | 108 | 68 | 32 | 12 | 223 | 12 | 5500 R.P.M | ||
| NCF-MT.5B | 67 | 70 | 136 | 87 | 40 | 14 | 273 | 18 | 4000 R.P.M |
Recommend
LATHE MEDIUM-LOAD CENTER-NC TYPE
LATHE MEDIUM-LOAD CENTER-NC TYPE
- Front end is fitted with angular contact ball bearing, thrust bearing and needle bearing.
- Suitable for CNC lathes at high-speed and medium-load. The waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
※ NC-B Type : Long nose live centers are suitable for small workpieces.
LATHE HEAVY-LOAD CENTER-NCFP TYPE
LATHE HEAVY-LOAD CENTER-NCFP TYPE
- The shaft is made of alloy steel and through vacuum heat treatment (HRC60°±1°). It possesses great rigidity and high durability.
- Front end is fitted with angular contact ball bearing & thrust bearing. Middle & Rear needle bearing and the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
LATHE HIGH-SPEED, WATER-PROOF CENTER-NCS (NUT) TYPE
LATHE HIGH-SPEED, WATER-PROOF CENTER-NCS (NUT) TYPE
- Center shaft is made of alloy steel and hardened through vacuum heat treatment to provide higher rigidity HRC60°±1°
- Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
- The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
※ Applicable to high speed lathes and CNC lathes with heavy loads.